For fastening the metal profile to the ridge support (SC50), as well as the ridge clips (CC25RT) to the profile.

Size 3.5×35: For fastening the SC50 ridge support to fiber cement.

For fastening tiles to fiber cement or profiles up to 1.6 mm thick.

DIN 7504K standard.

The high drill bit is necessary to penetrate profiles thicker than 5 mm and up to 12 mm.

The high drill bit is required to drill profiles thicker than 5 mm and up to 12 mm.

Metal-to-metal self-drilling screw for drywall panels.

Equipped with a 16 mm diameter iron–neoprene washer.

Equipped with an 18 mm diameter iron–neoprene washer.

Equipped with an 18 mm diameter iron–neoprene washer up to size 6.5 x 70, and a 25 mm washer for larger sizes.

Neoprene-Iron and Neoprene-Stainless Washers (Umbrella Type)

DIN 7982-C screw.

Phosphated treatment.

For perfect sealing, any type of washer must be placed on the nylon anchor, never between the screw and the anchor.

DIN 571 screw.<br><br>

DIN 7981 standard.

Made of AISI 304 with DIN 934 M6 nut.

Wood thread.<br><br><br><br><br>

Equipped with a DIN 934 nut and a DIN 125 flat washer.

Suitable for fastening fiber cement sheets to concrete structures.

Screw Anchor

Stud anchor.

Hook anchor.

Ring anchor.<br>

Used to anchor a threaded rod to concrete; it must be fully inserted into the plug to ensure optimal expansion.

Manufactured in steel.

Manufactured in steel.

Not suitable for slate fastening.

Manufactured in white zinc-plated steel.

DIN 125 standard.

Inner bags of: (1) 125 units.

Supplied in plastic-wrapped 1-meter-long packages.

For extending standard fastenings, suspended assemblies, and support brackets.

Inner bags of: (1) 500 units, (2) 100 units, and (3) 50 units.

Bags of 250 units.

For the installation of “pavés” glass blocks with 80 mm thickness.

Manufactured in polypropylene.

Manufactured in polypropylene.

Manufactured in polypropylene. The rosette has a 60 mm diameter. Available lengths: 70 mm or 90 mm.

Manufactured in POLYAMIDE 6.6.

Made of POLYAMIDE 6.6.

Inner boxes of: (1) 100 units, (2) 50 units, and (3) 25 units.

In hollow materials, the anchor knots for improved fastening.

Washer to be combined with the pre-assembled screw. Its function is to fasten insulation panels to the substrate.

The 8×80 stainless steel pre-assembled screw, equipped with a stainless steel corrugated plate, is the only one guaranteed for proper installation of vertical wall elements.

Screw for light fixings on hollow elements such as brick, porous concrete, etc.