DRAINAGE AND GUTTER FASTENERS

Clamps, U-bolts, drainage screws, radiator brackets, and gutter supports.

()

SINGLE CLAMP M6

Equipped with two M5 screws that thread directly into the clamp.

DOUBLE CLAMP M6

Equipped with two M5 screws that thread directly into the clamp.

LAG SCREW CLAMP M6

Equipped with two M5 screws that thread directly into the clamp.

DOUBLE LAG SCREW CLAMP M6

Equipped with two M5 screws that thread directly into the clamp.

ISOPHONIC CLAMP M6

Equipped with two M5 screws that thread directly into the clamp and feature an EPDM rubber profile.

DOUBLE ISOPHONIC CLAMP M6

Equipped with two M5 screws that thread directly into the clamp and feature an EPDM rubber profile.

BLACK CLAMP M6 WITH LAG SCREW

Equipped with two M5 screws that thread directly into the clamp.

CHROME-PLATED CLAMP M6

Equipped with two M5 screws that thread directly into the clamp.

YELLOW CLAMP M6 WITH LAG SCREW

Equipped with two M5 screws that thread directly into the clamp.

ONE-PIECE CLIP

Dimensions: Width 15 mm and thickness 1.2 mm.

BRIDGE CLIP

Dimensions: Width 15 mm and thickness 1.2 mm.

SINGLE CLIP CLAMP

For installation of water, electrical, gas, heating pipes, and more.

DOUBLE CLIP CLAMP

For installation of water, electrical, gas, heating pipes, and more.

BAND CLAMP

Dimensions: Width 15 mm and thickness 1.2 mm.

HIGH-PRESSURE CLAMP

Made of 1 mm thick steel sheet.

CLAMP M8

Equipped with two M6 DIN 7985 screws and two DIN 934 M6 nuts.

M8 DOWNPIPE CLAMP

Equipped with two slotted M6 hex screws, fastening washers, and riveted M6 side nuts, which speeds up assembly.

PAINTED DOWNPIPE CLAMP

Painted downpipe clamp.

M8 DOWNPIPE CLAMP (2 pcs)

Equipped with two slotted M6 hex screws, fastening washers, and riveted M6 side nuts, which speeds up assembly.

ISOPHONIC CLAMP M8

Equipped with two M6 screws that thread directly into the clamp and feature an EPDM rubber profile.

YELLOW GAS CLAMP M8

Equipped with two M6 screws that thread directly into the clamp.

STAINLESS STEEL CLAMP M8

Equipped with two stainless steel M6 screws, without nuts, as they screw directly into the clamp’s sheet metal.

PEAR CLAMP

Pear clamp.

REINFORCED CLAMP M8/M10

Equipped with two M6 screws threaded directly into the clamp.

ISOPHONIC CLAMP M8/M10

Equipped with two M6 screws threaded directly into the clamp, featuring an EPDM rubber profile.

ROUND LAG SCREW CLAMP

Equipped with two DIN 7985 M6 screws, two DIN 934 M6 nuts, and an 8 mm nylon anchor.

GUN-TRIGGER CLAMP

Equipped with two M6 DIN 7985 screws and two DIN 934 M6 nuts.

METAL FASTENER

Specially designed for stone houses.

FLUSH-MOUNT CLAMP

Equipped with two M6 screws and two DIN 934 M6 nuts.

ROUND PVC CLAMP

Equipped with two AISI 304 stainless steel M5 x 20 DIN 84 screws, two embedded M5 stainless steel DIN 934 nuts, a stainless steel DIN 7981 lag screw (5.5 x 38), and an 8 mm nylon plug.

SQUARE PVC CLAMP

Equipped with two AISI 304 stainless steel M5 x 20 DIN 84 screws, two embedded M5 stainless steel DIN 934 nuts, a stainless steel DIN 7981 lag screw (5.5 x 38), and an 8 mm nylon plug.

RECTANGULAR PVC CLAMP

Equipped with two AISI 304 stainless steel M5 x 20 DIN 84 screws, two embedded M5 stainless steel DIN 934 nuts, a stainless steel DIN 7981 lag screw (5.5 x 38), and an 8 mm nylon plug.

PERFORATED FASTENING STRAP

For the quick and temporary fastening of a pipe.

ASSEMBLED U-BOLT

Equipped with 2 DIN 934 nuts and 2 DIN 7980 lock washers.

U-BOLT SET FOR GREENHOUSES

Composed of two M8 U-bolts measuring 65 mm in width and 110 mm in height, connected by two plates and secured with four M8 DIN 934 nuts.

THREAD-HEAD LAG SCREW

For mounting M6, M8, and M10 clamps, respectively.

THREAD-HEAD LAG SCREW SET FOR GUTTER

Thread-head lag screw set for gutter.

DOUBLE-THREADED LAG SCREW

For mounting M8 and M10 clamps.

HEXAGONAL SPACER COUPLING

For connecting threaded rod.

PROFILE SCREW

Equipped with an unassembled DIN 934 nut and DIN 9021 washer.

PROFILES

Recommended for installing clamps with the profile screw.

WALL BRACKETS

For fastening profiles and clamps.

PIPE SUPPORTS

For fastening installation pipes using a U-bolt.

ADJUSTABLE HIDDEN RADIATOR SUPPORT SET EQUIPPED Nº1 (FERROLI)

Adjustable hidden radiator support set equipped No. 1 (Ferroli).

ADJUSTABLE HIDDEN RADIATOR SUPPORT SET EQUIPPED Nº3 (TRIANGULAR)

Adjustable hidden radiator support set equipped No. 3 (triangular).

ADJUSTABLE RADIATOR SUPPORTS SET Nº3 (WITH WELDED LAG SCREW)

Adjustable radiator support set No. 3 (with welded lag screw).

RADIATOR BRACKET MODEL 1

Radiator bracket model 1.

ONE-TONGUE RADIATOR BRACKET

One-tongue radiator bracket.

ONE-TONGUE NYLON RADIATOR BRACKETS

One-tongue nylon radiator bracket.

ADJUSTABLE FLUSH-MOUNT RADIATOR BRACKET

Adjustable flush-mount radiator bracket.

FLUSH-MOUNT RADIATOR BRACKET Nº5

Flush-mount radiator bracket No. 5.

SUPPORTS FOR SANITARY FIXTURES

Sets of 2 units.

FASTENING BRACKET FOR SLATE, CURVED TILE, AND CORRUGATED SHEET – ASSEMBLED

Fastening bracket for slate, curved tile, and corrugated sheet – assembled.

FASTENING BRACKET FOR FLAT TILE – ASSEMBLED

Fastening bracket for flat tile – assembled.

FASTENING BRACKETS FOR MIXED TILE – ASSEMBLED

Fastening bracket for mixed tile – assembled.

FASTENING BRACKET FOR TILE (WITHOUT PLATE)

Fastening bracket for tile (without plate).

FASTENING BRACKET FOR SANDWICH PANEL TILE – ASSEMBLED

Equipped with a DIN 933 M6×20 mm hex bolt, and a DIN 603 M6×20 mm square-neck bolt with its DIN 6923 nut for connection to the gutter hook.

PLATE BRACKETS

Equipped with a DIN 603 M6×20 mm square-neck bolt and M6×25 mm in the case of SL032RF, with a DIN 6923 nut.

TWISTED BRACKET

Equipped with a DIN 603 M6×20 square-neck bolt and a DIN 6923 nut.

BRACKET FOR FASTENING TO CORRUGATED SHEET (RIBBED)

Equipped with two DIN 603 M6×25 square-neck bolts and two DIN 6923 nuts.

DOUBLE URAL BRACKETS FOR WALL FASTENING

Equipado con dos tornillos de cuello cuadrado DIN 603 de 6 x 20 mm, con dos tuercas DIN 6923.

STRAIGHT FLAT BAR

Equipped with a DIN 603 M6×20 square-neck bolt and a DIN 6923 nut.

GUTTER MOUNTING PLATE

Equipped with a DIN 603 M6×20 square-neck bolt and a DIN 6923 nut.

GUTTER FASTENING STRIP

Used for continuous aluminum gutter systems.

PVC GAF FOR SINGLE-EDGE GUTTER

Suitable for certain gutter manufacturers in the market.

METAL GAF FOR SINGLE-EDGE GUTTER

Metal gaf for single-edge gutter.

PVC OR METAL HOOK FOR SINGLE-EDGE GUTTER

With bracket for fastening to corrugated sheet, slate, or curved tile.

METAL HOOK FOR SINGLE-EDGE GUTTER

Available lacquered in white and dark gray upon request. Please inquire about price and lead time.

METAL HOOK FOR SINGLE-EDGE PVC GUTTER, FOR NAILING ON STONE WALLS

Manufactured for single-edge PVC gutters, featuring a welded corrugated rod at the bottom.

PVC GAF FOR DOUBLE-EDGE GUTTER

PVC gaf for double-edge gutter.

METAL GAF FOR DOUBLE-EDGE GUTTER

Metal gaf for double-edge gutter.

PVC OR METAL HOOK FOR DOUBLE-EDGE GUTTER

With support for fastening to corrugated sheets, slate, or curved tiles.

METAL HOOK FOR DOUBLE-EDGE GUTTER

Support for fixing the double-edged PVC gutter models 125 and 185, by nailing or screwing to the base (plate) of a roof.

METAL HOOK FOR DOUBLE-EDGE GUTTER TYPE SAENGER 12-26

Metal hook for double-edge gutter, Saenger type 12-26.

HOOK FOR STORMLINE-AMAZON GUTTER

Stormline Gutter Hook - Amazon

PVC HOOK FOR EPE-TYPE GUTTER

Formed by a PVC or metal bracket joined to the support using a square-neck screw DIN 603 (6 x 20 mm) and a DIN 6923 M6 nut.

METAL HOOK FOR EPE-TYPE GUTTER

Support for fixing EPE type PVC gutters, models C26 and C34, by nailing or screwing to the base (plate) of a roof.

PVC GAF FOR DOUBLE-WALL GUTTER T100 (BÁRCIA TYPE)

PVC bracket for double-wall gutter T100 (Barcia type)

PVC HOOK FOR DOUBLE-WALL GUTTER T100 (BARCIA TYPE)

Formed by a PVC or metal bracket joined to the support using a square-neck screw DIN 603 (6 x 20 mm) and a DIN 6923 M6 nut.

METAL HOOK FOR DOUBLE-WALL GUTTER T100 (BARCIA TYPE)

Soporte para la fijación del canalón de PVC tipo T100, mediante clavado o atornillado a la base (placa) de un tejado.

WHITE-LACQUERED METAL HOOK FOR EUME-TYPE GUTTER

Bracket for fastening Eume-type PVC gutter by nailing or screwing it to the base (plate) of a roof.

METAL GUTTER HOOK

Support for fastening gutters with 25, 30, and 33 developments by nailing or screwing to the base (plate) of a roof.

BRACKET FOR METAL GUTTER

For fastening gutters with 25, 30, and 33 developments.

NAIL-ON HOOK

For nailing into stone walls.